| Beyondopto Contact Closure over Fiber series support 1~16 Channels simplex or 1~8 Channel duplex contact closure over one multi-mode or single-mode optical fiber. These fiber optic transmitter and fiber optic receiver are typically used in applications with Access Control System, Alarm Event Triggering, Building Automation and Environmental Control Systems, Fire & Alarm Systems, PIR signal Transmission, Traffic Signal Control Equipment, etc, and are available for stand-alone or rack-mount installations. FC, ST or SC optical connectors is optional.
Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. LED indicators are provided to instantly monitor the system operating status. Features • Support Point-to-Point or Daisy-Chain connection
• Dry Contact Closure or TTL data over one fiber
• Multimode Fiber Support for Distances up to 4 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM Beyondopto Fiber Optic Transmission Systems can transmit audio, data, alarm and ethernet signals, Our Fiber Optic Integrated Platform is A System Designed By You - For You. No matter how complex your system is, you just give your request to us, We will give you a satisfactory solution and design diagram. Specifications Opitcal: | Wavelength | 1310nm&1470nm~1610nm | | Output Power | -14~ -8dBm / -5~0dBm | | Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode | | Rx sensitivity | -30dBm | | Optical connector | FC,ST,SC (optional) | | Distance | 0~2KM (MM) / 0~120KM (SM) | Contact Closure: | Connector | Standard terminal lead | | Signal input | alarm, Binary input, support TTL,RS-232/422/485 or passive Contact Closure | | Signal output | Arbitrary alarm, Binary output, support TTL,RS-232/422/485 or relay output | | Data | | Data protocol | RS232,RS422,RS485,Manchester,BIPHASE data | | Data rate | 0~500 Kbps | | Error rate | < 10-9 | | Connector | Standard terminal lead | | Audio | | Input/output Impedance | 600ohm(unbalance) | | Max input/output voltage | 3.0Vp-p | | Frequency Response | 10 Hz～29kHz @±3dB | | SNR | > 70dB | | Connector | Standard terminal lead | | Electrical & Mechanical | | Input Power Requirements: | DC 5V@2A | | Power Adapter: | AC 90V~240V | | Power Consumption: | < 3W | | Stand-Alone Dimensions: | 183mm × 154mm × 30mm | | Shipping Weight: | (include Transmitter & Receiver ) 1.5kg | | Environmental | | Operating Temperature: | -20°C ~ +75°C | | Storage Temperature: | -40°C ~ +85°C | | Relative Humidity: | 0% ~ 95% (non-condensing) | | MTBF: | >100,000 hours | Ordering Information & Optical Specifications | Model | Fiber Mode | Connecter | Alarm Channel | Optical Power Budget | Max Transmission Distance | | Transmitter | Receiver | | BAT0002K | BAR0002K | SM | FC/ST/SC | 2 | 18dB | 25km | | BAT0004K | BAR0004K | SM | FC/ST/SC | 4 | 18dB | 25km | | BAT0008K | BAR0008K | SM | FC/ST/SC | 8 | 18dB | 25km | | BAT000HK | BAR000HK | SM | FC/ST/SC | 16 | 18dB | 25km | Note:
• The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth.
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug.
• Please feel free to consult factory for any special requirement and customization. • Due to continuous improvement, all fiber optic transmission systems and video over fiber product specifications are subject to change without further notice. |
