ShenZhen Beyond Optoelectronoic Technology Co.,Ltd
Quality is the life of the enterprise, the credit is the purpose.
Add to Cart
Specification:
3G-SDI with Audio,Ethernet to fiber multiplexer can transmit 1-ch BIDI 3G/HD-SDI signal,1-ch BIdi banlanced/analogue audio and 1port 10/100 ethernet over 2 singlemode ST/FC fiber.
1 channel video and audio ethernet transmission of digital video signal over optic fiber
· Handles pathological pattern
· Automatic cable equalization to ensure signal integrity
· Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s
· Support signal type: 270Mbit/s to 3Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M standards
· Long transmission capability at least 10 km(6.2 miles) , up to 80 km
· Terminal block power input for industrial application
·Supports hot swapping and hot plugging
·Simplex ST/PC single mode optical connection
Opitcal:
| Wavelength | 1310nm&1470nm~1610nm |
| Output Power | -9~-3dBm / -3~+2dBm |
| Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode |
| Rx sensitivity | -18dBm |
| Optical connector | LC/PC (optional) |
| Distance | 0~500M (MM) / 0~80KM (SM) |
Video:
| DI Input | ||
| Signal Type SDI | SMPTE 424M, SMPTE 292M, SMPTE 259M | |
| Data Rates | 270Mbit/s - 1.48Gbit/s - 3Gbit/s | |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s | |
| Connector | BNC 75 Ohm | |
| Number of tranmitter channel | 1 | |
| Number of tranmitter Loopout | 1 | |
| Number of receiver output | 2 | |
Balance Audio
| Number of Channels | 1 BIDI |
| Input Connector | XLR(female) |
| Output Connector | XLR(male) |
| Input Impedance | 10K Ohm |
| Output Impedance | 50 Ohm |
| Max input/output voltage | 3.0Vp-p |
| Frequency Response | 10 Hz～44.1kHz @±3dB |
| SNR | > 70dB |
Ethernet:
| Work mode | Full duplex/half duplex |
| Data Rate | 10/100Mbps(AUTO) |
| connection terminal | RJ45 |
| General: | ||
| Input Power | AC 90~240V | |
| Power consumption (maximum) | Transmitter: 1.8W Receiver: 1.5W | |
| Operating temperature | 0°C to 55°C | |
| Storage temperature | -10°C to 70°C | |
| Operating humidity | 0 ~ 95% (non-condensing) | |
| Net Weight | 7.5kg (pair) | |
| Case material | Aluminum | |
Dimension:482mm×252mm×50mm
High definition photo:
